Steel Weight Calculator: plate, bar, angle, channel

How it's calculated. Weight = cross-section area × length × density. Steel weighs 490 lb/ft³: a plate weighs 40.8 lb per square foot per inch of thickness, a round bar 2.67 × d² lb per foot.
4' × 8' × ¼" plate = 32 ft² × 0.25 × 40.8 = 326.7 lb (10.21 lb/ft²)
01

Shape and size

ftin
in
02

Material

490 lb/ft³Density
03

Length and quantity

ftin
Total weight
326.7lb
Sheet or plate 4' 0" × 8' 0" × ¼" · Carbon steel
Weight per square foot10.21 lb/ft²
Section area12 in²
Weight from the nominal size at the listed density

Cross-section

Sheet or plate 4' 0" × 8' 0" × ¼" · Carbon steel
PLAN8' 0"4' 0"t = ¼"DELIMETRA · FT-IN
weight = area × length × densityFormula12 in²Section area490 lb/ft³Density
Your local prices
$
$

Prices are not pre-filled: metal prices change by the week and by the supplier.

How we calculate

Weight = cross-section area × length × density. Steel is taken at 490 lb/ft³ (7,850 kg/m³), the value behind the standard weight tables.

Areas: round π·d²÷4; hexagon 0.866·s²; angle (A + B − t)·t; channel d·t + 2(b − t)·t; pipe π(OD² − ID²)÷4; rectangular tube with rounded corners, outside radius 2t, as in the AISC Manual.

Rolled angles and channels have rounded and tapered parts, so their book weight can differ from these simple sections by a few percent; use the mill's figure when it matters.

Pipe sizes follow ASME B36.10: NPS is a name, not a measurement, and each size has one outside diameter whatever its schedule.

Total
326.7lb

A 4 × 8 ft steel plate ¼ inch thick weighs 326.7 lb: 32 square feet × 10.21 lb per square foot. Every steel weight comes from the same rule: cross-section area × length × density, with carbon steel at 490 lb per cubic foot. The calculator above does it for plate and sheet, round, square, hex and flat bar, angle and channel, in steel, stainless, aluminum, copper, brass or cast iron, per foot, per piece and for the whole order.

How the calculator works

Pick the shape and enter its size in inches and fractions; for sheet steel you can pick the gauge instead of the thickness. Choose the metal, the length of one piece and how many you need. The result is the total weight, the weight per foot (per square foot for plate), one piece and the cross-section area, with a drawing of the section to scale.

Cross-section areas

ShapeAreaSteel, lb per foot
Plate or sheetwidth × thickness40.8 × ft² × in of thickness (per piece)
Round barπ × d² ÷ 42.67 × d²
Square bars²3.40 × s²
Hex bar0.866 × s² (across flats)2.95 × s²
Flat barw × t3.40 × w × t
Angle(A + B − t) × t3.40 × (A + B − t) × t
Channeld × t + 2 (b − t) × t3.40 × area

Dimensions in inches. 3.40 is 490 lb/ft³ ÷ 144: one square inch of steel section weighs 3.40 lb per foot of length. A 2 × 2 × ¼ angle has (2 + 2 − 0.25) × 0.25 = 0.94 in² and weighs 3.19 lb per foot, the same as the steel tables.

Plate and sheet by thickness

Thicknesslb per ft²4 × 8 sheet
18 gauge (0.0478 in)1.9562 lb
16 gauge (0.0598 in)2.4478 lb
14 gauge (0.0747 in)3.0598 lb
10 gauge (0.1345 in)5.49176 lb
⅛ in5.10163 lb
¼ in10.21327 lb
½ in20.42653 lb

Gauge tables often print slightly higher weights for sheet (2.50 lb/ft² for 16 gauge) because the Manufacturers' Standard Gauge was defined from weight at 41.82 lb per square foot per inch. The calculator uses 490 lb/ft³ for all steel, so it reads about 2 % lower for gauge sheet. Galvanized, stainless and aluminum sheet use other gauge tables; for those, enter the thickness.

Other metals

The same size in another metal scales with density: stainless 304 or 316 is about 2 % heavier than carbon steel (8,000 kg/m³), brass 8 % heavier, copper 13 % heavier, cast iron 8 % lighter, and aluminum about a third of the weight (168 lb/ft³). Choose "My density" for any other alloy.

Rolled shapes and their names

Structural shapes are named by their weight. A W8×18 beam and a C4×5.4 channel weigh 18 and 5.4 lb per foot. Channels and some angles have tapered or rounded parts that a one-thickness formula cannot capture: for a C4×5.4, the formula with the web thickness gives about 4.3 lb per foot. For rolled shapes, use the weight in the name; for beams, see the Beam Deflection Calculator, which lists W-shapes. Pipe and tube have their own pages: the Pipe Weight Calculator by NPS and schedule, and the Tube Weight Calculator for square and rectangular tubing.

Common mistakes

Cutting the stock to length? The Cut List Calculator plans the cuts from 20 ft bars with the least waste.

Questions

How much does a 4 × 8 sheet of steel weigh?

At ¼ in thick, 326.7 lb: 32 ft² × 10.21 lb/ft². At ⅛ in, 163 lb; at 16 gauge (0.0598 in), about 78 lb.

How much does steel weigh per cubic foot?

About 490 lb per cubic foot, 0.2836 lb per cubic inch, or 7,850 kg/m³ for carbon steel. Stainless is about 2 % heavier, aluminum about a third.

How do I calculate the weight of a steel plate?

Length × width in feet × thickness in inches × 40.8. A 2 × 3 ft plate ½ in thick is 6 × 0.5 × 40.8 = 122.5 lb.

How much does a 1 inch round steel bar weigh?

2.67 lb per foot: 2.67 × d² with d in inches. A 20 ft bar weighs 53.5 lb.

How much does aluminum weigh compared with steel?

Aluminum is about 34 % of the weight of steel for the same size: 168 lb/ft³ against 490.

Why does my channel weigh more than the calculator says?

American Standard channels have tapered flanges thicker than the web; the calculator assumes one thickness. Use the weight in the name: a C4×5.4 weighs 5.4 lb per foot.

Related calculators